The Rise of the Falleyes

Submitted by Mitch Eeagan

[dropcap size=small]W[/dropcap]hen an artist depicts walleyes in their natural environment, their brush strokes often reveal an image of these sensational fish practically bellied to bottom while feasting on forage many fathoms below. After all, it’s at the lake floor in deep water they spend the majority of their time, right?

Not always…

Actually, it’s within this fish’s bottom-dwelling realm where ‘eyes linger very little. In fact, they’re here more when in a neutral mood, say, after a cold front, than when searching for food. This holds especially true as summer turns to fall.

So where, instead, do walleyes wander when on the prowl this time of year?

The answer is twofold, actually: As a rule, you’ll find walleyes suspended just below the surface over deep water haunts; particularly in areas near rock-strewn reefs or sunken islands.

What’s the reason for swimming so close to this structure? Because when the mood arises, they can hightail it straight across the water column to hunt down prey.

And although there’s a large array of tactics used to catch ‘eyes when they are on the rise, two techniques stand out from the tackle box: trolling at a creep with a crawler harnesses when the fish are still suspended, and snap jigging splits when fish are hanging tight to the rocks.

A trolling we will go

Enter fishing pro Mark Martin of Twin Lakes, Michigan. He’s been catching walleyes from waters for a living since the late 1980’s. He’s also seen trolling tactics morph from being an aimless pull of livebait rigs to narrowing down every nuance of a walleye’s whereabouts.

“Speed, size and scent are crucial when it comes to catching walleyes when they are suspended,” says Martin. I’ll troll at various speeds until I get bit, and then make sure to stick to that pace. After that, I’ll start switching out blades, trying out different sizes and shapes to narrow the bite down more.

“And I confirm my harnesses have the freshest bait on them at all times, as the smell and taste of a crawler—kept fresh while in a Frabill Crawler Cabin—is irresistible to most any fish.”

Overall, Martin aims for speeds from .07 to 1.3 MPH when pulling harnesses behind in-line planer boards. And he’s adamant about keeping whatever tempo he’s been getting bit at, right down to the one-tenth of a mile-per-hour.

It’s not uncommon to see Martin rummaging through Plano tackle totes in search of new blades about every half-hour. In general, you’ll find him using size-3 and -4 Colorado and Indiana blades when fishing inland lakes, and beefing things up to size-5 and 6- blades, and adding willows to the mix, on the Great Lakes and reservoirs where walleyes feed on larger shad.

Martin generally uses 1-ounce inline weights spaced 6-feet ahead of his spinning blades. With this weight, when trolled at 1 MPH, the offering will sink about half the amount of line out behind the board when using 10-pound-test monofilament. (Example: Thirty feet of line out will drop 15 down.)

4-inch split-tail minnow rigged with a 5/8-ounce Custom Jigs & Spins H2O Precision Jig – the perfect ploy for snap-jigging atop reefs.

Leave to believer

Not long ago, this outdoor writer got the chance to see how Humminbird Side Imaging can make finding suspended fish and forage easier than ever. And it didn’t take long to become a believer after seeing (and catching) fish I would never have known were there without the groundbreaking technology.

Fish don’t always show up on standard sonar when high in the water column, due to them spooking out from under the boat and the transducer’s range.

Side Imaging, however, allows anglers to see fish and bait suspended just under the surface hundreds of feet to both sides in a two-dimensional illustration. And with just a couple button swipes, a GPS position can be placed over the area where the fish so your next pass can be on the ‘X’.

Rip ‘em up

Sonar and GPS are also a must when fishing for walleyes holding tight to reefs, especially when the unit’s coupled with a SD card filled with LakeMaster mapping.

With this mapping technology, your boat can be positioned within casting distance to structure without running up on it and spooking fish. And this is exactly what De Pere, Wisconsin, fishing pro Steve Becker does; holding his boat in place with his bow-mounted Minn Kota electric trolling motor.

Professional angler Steve Becker grips and grins with a nice walleye taken while snap jigging a 4-inch split-tail minnow over the top of a reef with a medium-power fast-action St. Croix Legend Tournament spinning rod.
Professional angler Steve Becker grips and grins with a nice walleye taken while snap jigging a 4-inch split-tail minnow over the top of a reef with a medium-power fast-action St. Croix Legend Tournament spinning rod.

One of Becker’s favorite ploys? Casting 4- and 5-inch split-tail minnows on top of reefs and rip-jigging them back to his boat. “Rip-jigging”, by the way, is the continuous swift lift and radical fall of a heavy jig while being rapidly retrieved to the boat; a technique that triggers strikes from even the most lethargic fish.

“But even when using such an aggressive tactic, the light bite of a walleye can still go undetected; so you have to use equipment that allows you to feel every little tick and strike,” Becker beckons.

Six- to 8-pound-test superline spooled onto a spinning reel that’s coupled to a 6-foot 8-inch, medium, extra-fast-action St. Croix Tournament Walleye Snap-Jig spinning rod is what you’ll find in Becker’s hand most often. “The superline matched with a super-sensitive St. Croix allows me to feel the lightest of strikes.” Becker adds. “Basically, I set the hook anytime I feel weight or the slightest “tick”.

Overall, the narrow shape of a Custom Jigs & Spin’s 5/8-ounce H2O Precision Jig goes perfectly with a spit-tail minnow. And the jig’s wide-gap hook will hook up better when bit.

Narrow focus

Looking to land more walleyes this fall? Just look up!

Pull crawler harnesses behind boards when fish are high, and snap-jig softbaits on nearby reefs and you’ll catch plenty. I promise.

Mitch Eeagan is a writer and photographer who lives off the land in the heart of the thickest cedar swamps of Michigan’s Upper Peninsula.